Aluminium Nickel Bronze Rod C63000
Aluminium Nickel Bronze Rod C63000 is wear-resistant and high strength (both at room and elevated temperatures) alloy rod. It is an excellent choice for bearing and bushing applications involving heavy loads, adhesive wear, friction, abrasive wear and corrosion. The addition of nickel increases the alloy strength without diminishing its excellent ductility, toughness and corrosion resistance properties. It also has good fabrication and welding properties. It can be suitably used in the demanding fields of Aircraft, Oil & Gas Exploration, Earth Moving Equipment and Heavy Transportation.
TYPICAL CHEMICAL COMPOSITION
|
Al
|
: 9.0% - 11.0%
|
|
Si
|
: max. 0.25%
|
|
Fe
|
: 2.0% - 4.0%
|
|
Sn
|
: max. 0.20%
|
|
Zn
|
: max. 0.30%
|
|
Mn
|
: max. 1.50%
|
|
Ni
|
: 4.0% - 5.5%
|
|
Cu
|
: Balance
|
TYPICAL MECHANICAL PROPERTIES
|
* Tensile Strength
|
min. 100,000 psi (690MPa)
|
|
* Yield Strength
|
min. 50,000 psi (345 MPa)
|
|
* Elongation
|
min. 10%
|
|
* Brinell Hardness
|
min. 200
|
FABRICATION SERVICES
We provide fabrication services to your specification
Disclaimer: Specifications and descriptions of the articles may change without notice. Teck Leong Industries Pte Ltd, Ban Soon Cheong Pte Ltd, Radiation Control (Asia Pacific) Pte Ltd, Eurometalli (Far East) Pte Ltd and Advance Storage Pte Ltd (known as “Our Group of Companies”) whether jointly or severally is/are not responsible for the accuracy, completeness or usefulness of information contained herein and shall not be liable for any damage, loss, injury or inconvenience arising from or in connection with the contents of this publication. All information presented in this publication is only strictly for reference purposes. Each and every member of Our Group of Companies disclaims all liability for the information presented nor is such information a warranty or representation by Our Group of Companies or any member thereof.